 |
 Boat Paint - We provide a range of boat paints that should cover most peoples needs. The following paints are available; aluminum, boat deck paint, epoxy, boat bottom, fiberglass & duck boat paint.
|
|
|
|
|
Find information, prices and links to Boat Paint Fiberglass. Browse a wide range of colors from the provided color chart and buy your selection from the website provided.
|
|
This page is a near duplicate of the more popular title Fiberglass Boat Paint because the page titles should be about the same topic.
|
|
Boat Paint Fiberglass
Armorpoxy
The chart below shows you the selection of colour that Armorpoxy have to offer; bright white, navy blue, black, natural beige, sand dune, bright yellow, oak gallon, bright orange, bright red, platinum grey, steel grey, hunter green, Kelly green, off white, tile red and clear. All these colors can be used as Boat Paint Fiberglass and will cost you $67.89 for each color.
|
|
|
Color Chart
|
All Armorpoxy products are 'solvent-based' not 'water-based' for maximum life and performance. Standard coverage is about 300sq ft/gal, less on porous surfaces.
Shipping via UPS or DHL ground service is a flat rate of $9.99/gal anywhere in the continental US. Other areas are charged accordingly.
Custom Colors are available at $10.00 with an additional charge for custom tinting.
Please note that regular Armorpoxy is not suitable for pool use. For pool use, please select the 1 or 2 part pool paint product line from Armorpoxy.
|
|
|
|
| The most relevant links we could find, placed here free |
 Armorpoxy
- Boat Paint Fiberglasss, deliver anywhere in the continental USA, custom colors available, Armorpoxy is not suitable for pool use. armorpoxy100.stores.yahoo.net
Go 2 Marine
- Bottom paint, Boat Paint Fiberglass, unepoxy plus modified epoxy, offshore anti-fouling paint. www.go2marine.com
| All prices and information on this page were correct on the date of November 9th 2006. |
|
|
|
Unepoxy Plus Modified Epoxy
|
$55.95 - $167.95
Boat Paint Fiberglass:
 Hard one part modified epoxy antifouling bottom paint.
Formulated for heavy fouling conditions in saltwater or freshwater.
Ideal for use on trailerable boats.
Compatible over all previously applied hard bottom paints Use on wood, fiberglass, or properly primed steel hulls.
Single season performance.
Apply with brush, roller or spray.
Drying time before overcoating: 4 hours.
Product is considered HAZARDOUS and can only ship via UPS Ground without making special shipping arrangments.
Buy the above Boat Paint Fiberglass at Armorpoxy.
|
|
|
Offshore Anti-Fouling Paint
|
$79.95 - $307.95
Combines superior anti-fouling performance with a supersmooth low friction surface.
Combined with Teflon to help reduce drag.
Easy to wet sand and burnish for a hard, smooth finish.
VC Offshore has been developed for use on fiberglass, wood and properly primed metals (except aluminum).
For use in Fresh and Salt water.
Buy the Boat Paint Fiberglass pictured above at Armorpoxy.
|
|
Boat Paint Home
Back
A-Z Index